Industrial Motor Prototypes: A Custom Axial Flux Motor, Built to Order
When a prototype needs a motor that no catalogue offers, we build it. You get a new, assembled axial flux permanent magnet BLDC motor, made to the torque, speed, supply voltage and installation space of your product, from a single unit.
The motor is defined in our online configurator and checked by simulation before anything is made, so the prototype motor you receive is the one you evaluated.
From €12,100 incl. 21% VAT (€10,000 excl. VAT, one motor including its electrical design) · Lead time from 1 month · Shipping calculated separately; defective parts replaced at no cost, no other returns · Pricing details
Configure your prototype motor Talk to an engineerWhat You Receive
- An assembled axial flux BLDC motor with permanent magnet rotors and printed (PCB or DCB) stators.
- Your size and output. Outer diameters from 60 mm to 406 mm and output up to 56 kW, reached by stacking rotor-stator pairs.
- Your construction. Housed with protection up to IP67, naked (rotor and stator only, mounted into your structure) or as a wet motor.
- Your environment. The platform is specified from -40 to +60 °C.
- Simulated data for the design you ordered, including its efficiency map.
Where an Industrial Prototype Uses It
Power tools. A short, flat motor leaves room for the gearbox, the battery and the grip, and high efficiency means less heat in the hand and more work per charge.
Light electric vehicles. Wheel speeds are low and torque demands are high, which is where a large-diameter axial flux motor works well, see axial flux hub motors.
Machinery. Direct drives for rollers, pumps and positioning axes, where removing a gearbox removes backlash, noise and a maintenance item.
Why Axial Flux for a Prototype
Torque grows steeply with diameter in an axial flux motor, so a flat motor can deliver the torque of a much longer one. Our motors offer up to 50% weight reduction compared with conventional motors of the same output and up to 96% efficiency. The stators are printed circuit boards, so the winding is reproducible from the first prototype to the production run. The axial flux vs radial flux comparison covers the trade-offs in detail.
Ordering and Lead Time
- Configure the motor in the configurator and run the simulations. Both are free.
- Order when the simulated performance convinces you. The minimum order is one motor; the cost per motor becomes economically viable from about 8 to 10 motors.
- After the design is final, the parts are made in parallel: PCB stators usually take 20 working days, structural parts about 14 days, and rotors up to 50 days because of neodymium magnet procurement.
The price breakdown and a live estimator for larger orders are on the pricing page.
Frequently Asked Questions
Can I order a single prototype motor?
Yes. The minimum order is one motor. The cost per motor becomes economically viable from about 8 to 10 motors.
What protection rating is available?
Housed variants are available with protection up to IP67. Naked motors are protected by the structure they are mounted into.
What do you need from me to build the motor?
The torque and speed at your operating points, the supply voltage, the space available and the duty cycle. You can enter all of them in the configurator and see the simulated result before ordering.
How long does delivery take?
Lead time starts from about one month after the design is final. PCB stators usually take 20 working days and rotors up to 50 days because of magnet procurement.
Build the motor your prototype needs
Configure it for your operating points and read the simulated efficiency map before you order.
Configure your motor Talk to an engineer